10
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
www.insignia-products.com
Setting up your TV
Connecting an antenna, cable TV, or
satellite TV
To connect an external antenna, cable TV, or
satellite TV:
1 Remove the port cover from the back of your
TV (1).
2 Plug the antenna cable (2) from an antenna,
cable TV, or satellite receiver (3) to the RF
INPUT jack on your TV.
3 Replace the port cover on the back of your
TV.
4 Turn on your TV.
5 Press INPUT, then press / to select TV.
Connecting a standard video device
To connect a standard video device to the
AV1 INPUT jacks:
1 Remove the port cover (1) from the back of
your TV.
2 Plug an RCA video cable (4) into a standard
video source (5) and into the VIDEO jack on
the back of your TV.
3 Plug the RCA audio cables (2) into the video
device's audio output jack and into the upper
AUDIO L and AUDIO R jacks on the back of
your TV.
4 Turn on your TV.
5 Press INPUT, then press / to select AV1.
To connect a standard video device to the
AV2 INPUT jacks:
1 Remove the port cover (1) from the back of
your TV.
2 Plug an RCA video cable (8) into a standard
video source (5) and into the VIDEO jack on
the side of your TV.
3 Plug the RCA audio cables (7) into the video
device's audio output jack and into the upper
AUDIO L and AUDIO R jacks (6) on the side
of your TV.
4 Turn on your TV.
5 Press INPUT, then press / to select AV2.
RF INPUT
RF INPUT
Note
Your TV supports multiple video source inputs. For
temporary or easy-access video connections, use
the side jacks (AV2). For more permanent
connections, use the rear jacks (AV1).
RF INPUT
08-1156 NS-LTDVD26-09CA - combined.fm Page 10 Tuesday, April 1, 2008 1:25 PM
To Next Page
Loading...
