14
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
www.insignia-products.com
Labeling a channel
To label a channel:
1 Tune your TV to a channel you want using the
number buttons.
2 Press TV MENU on the remote control, then
press / to highlight the CHANNEL icon.
The
CHANNEL
menu opens.
3 Press / or ENTER to enter the
CHANNEL
menu.
4 Press / to select Channel Label, then
press .
5 Press / to move the cursor, then press
/ one or more times to select each
character for the channel label.
6 Press TV MENU one or more times to close
the menu.
Adjusting picture settings
To adjust picture settings:
1 Press TV MENU on the remote control, then
press / to highlight the PICTURE icon.
The
PICTURE
menu opens.
2 Press / or ENTER to enter the
PICTURE
menu.
3 Press / to select one of the following
settings, then press / to change the
setting. You can select:
• Picture Mode—Standard, Dynamic,
Soft, or Personal.
• Contrast
•Brightness
•Tint
• Color
• Sharpness
• Color Mode—Cool, Normal, or Warm. In
PC mode, when Color Mode is
highlighted, press / or ENTER to
open the Color Mode sub-menu.
• Color Mode–Warm, Cool, User, or
Normal (PC mode only). When Color
Mode is set to User, the following
settings are available:
• USER-R–(Red setting)
• USER-G–(Green setting)
• USER-B–(Blue setting)
• Zoom Mode—Wide, Cinema, Normal, or
Zoom (Only Wide and Normal are
available in PC mode).
• 3DNR—Standard, Strong, Auto, Off, or
Weak. If your TV is operating in an area
where only weak signals are available,
selecting one of these noise reduction
settings may improve reception.
4 Press TV MENU one or more times to close
the menu.
Adjusting audio settings
To adjust audio settings:
1 Press TV MENU on the remote control, then
press / to highlight the Audio icon. The
Audio
menu opens.
2 Press / or ENTER to enter the
Audio
menu.
CHANNEL
TV Source
Auto Scan
Channel No.
Channel Label
Show/Hide
CATV
Hide
1
-
To Next Page
Loading...
