Quick Setup Guide
Check out these important safety instructions to keep yourself and your devices safe.
Before using the converter/adapter, check the product you intend to connect to the
converter/adaptor for the manufacturer’s voltage and wattage rating, which should be located on
the product.
Caution: Adapters alone do not convert voltage. To avoid damaging your device, use adaptors
with the voltage converter when appropriate.
The converter is designed to be used only for 10 minutes or less.
Do not leave the converter/adapter in the power outlet when not in use.
Do not continue to use the converter/adapter if it is not working properly, has been damaged, or
dropped in water
This converter should be used with single-voltage appliances.
No grounding. This product is for use with unearthed or double-insulated appliances only.
Warning: This product is intended for adult use. This product is NOT intended for use by
unsupervised children. Choose proper settings and plug in this product before directly supervising
children using devices connected to this product. Do not use the converter for electronic controlled
appliances.
MAKING SURE YOUR DEVICE IS COMPATIBLE
1. Determine the voltage of the power outlet you want to use. See the table on the back for common
voltages.
2. Check the voltage of the device you want to connect to the power outlet.
3. Compare the power outlet voltage to your device’s voltage, then use the following table to decide
whether to use an adapter plug only or an adaptor plug with the converter.
Note: The voltage of some devices will be a range. If your power outlet voltage is in the range of
your device’s voltage (for example, a 120–240V device and a 240V power outlet), you do not need
the converter.
To Next Page
Loading...
