EasyManua.ls Logo

Insignia NS-MW09SS8 - Using Multi-Stage Cooking; Using the Energy Saving Mode; Checking Time and Power Level During Cooking

Insignia NS-MW09SS8
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
0.9 Cu. Ft. Microwave Oven
www.insigniaproducts.com
Using multi-stage cooking
Up to two stages can be used to cook your food. For example, you can
defrost a meal, then cook it.
In this example, the food will be cooked with 80% power for five minutes,
then 60% power for 10 minutes.
1 Put the item to be cooked into the oven and close the door.
2 Press Time Cook, then press 5, 0, and 0 to set the cooking time to five
minutes.
3 Press Power, then press 8 to set the power level for 80% power.
4 Press Time Cook, then press 1, 0, 0, and 0 to set the second cooking
time to10 minutes.
5 Press Power, then press 6 to set the second power level to 60% power.
6 Press START/ +30 SEC. to begin cooking.
Using the energy saving mode
Energy saving mode turns off the LED display to save power.
In standby mode, press the “STOP/Cancel once (for less than 3
seconds to avoid starting the child lock function), then release.
OR
In child-lock mode, press the STOP/Cancel” once (for less than 3
seconds), then release.
Checking the time and power level while cooking
To check the time while cooking a meal, press Clock. The display
shows the current time for three seconds, then returns to the
cooking time remaining.
To check the power level while cooking a meal, press Power. The
display shows the power level being used for three seconds, then
returns to the cooking time remaining.
Note
Auto cooking cannot be used with multi-stage
cooking.
Note
Energy saving mode only works if the door is
closed.
NS-MW09SS8_17-0526_MAN_V2_ENG.fm Page 17 Tuesday, June 27, 2017 10:11 AM

Related product manuals