8
NS-P9DVD15 Portable DVD Player
www.insigniaproducts.com
Setting up your player
Connecting to AC power
To connect to AC power:
1 Plug one end of the AC power adapter into the DC IN jack on the side
of your player.
2 Plug the other end of the adapter into an AC wall outlet.
Note
The AC adapter is used to disconnect this device from AC power.
It should not be obstructed OR should be easily accessible during
use. To completely disconnect the power, unplug the AC adapter
from the AC power outlet.
Cautions
• The AC power adapter included with this unit is for its use
only. Do not use it with other equipment.
• When the unit is not going to be used for an extended
period of time, disconnect the AC power adapter from
the wall outlet.
• When the AC power adapter is plugged in, the apparatus
is not completely disconnected from the main power
supply, even when the power is turned off.
NS-P9DVD15_13-0821_MAN_ENG.fm Page 8 Thursday, December 12, 2013 2:42 PM
To Next Page
Loading...
Need help?
General
