Insignia NS-RMT2D18 - TROUBLESHOOTING; ONE-YEAR LIMITED WARRANTY; CONTACT INSIGNIA

TROUBLESHOOTING
PROBLEM SOLUTION
The LED
does not
turn on
when a key
is pressed.
• Replace the
batteries.
• Make sure that
your batteries are
installed correctly.
The + and -
symbols should
match the symbols
inside the battery
compartment.
The LED
turns on,
but the
remote does
not control
my device.
• Make sure that
your remote is
programmed to
your device.
• Make sure that
your remote is set
to the correct mode
(TELEVISION
or CABLE /
SATELLITE /
STREAMING).
I have tried
all of the
codes for
my device’s
brand, but
none of
them work.
• Use Setup Method
C: Code Search.
ONEYEAR LIMITED
WARRANTY
Visit www.insigniaproducts.com
for details.
CONTACT INSIGNIA:
For customer service, call
1-877-467-4289 (U.S. and Canada)
or 01-800-926-3000 (Mexico)
www.insigniaproducts.com