Insignia NS-RMT2D18 User Manual

LOCKING AND UNLOCKING
CHANNEL CONTROLS
The channel control lock lets you
lock channel controls (Channel Up
and Down, Digits, Enter, and Last)
to either a TV or a cable/satellite/
streaming device.
Locking channel controls to one
device
1 Press and hold SETUP until your
remote’s LED blinks twice.
2 Press 9, 7, 3, then press CH +.
3 Press
TELEVISION or
CABLE / SATELLITE /
STREAMING to lock channel
controls to that device. The LED
blinks twice.
Unlocking channel controls
1 Press and hold SETUP until your
remote’s LED blinks twice.
2 Press 9, 7, 3, then press CH -.
RESETTING REMOTE TO
FACTORY DEFAULTS
1 Press and hold SETUP until your
remote’s LED blinks twice.
2 Press 9, 7, 7.

Insignia NS-RMT2D18 Specifications

General

Brand	Insignia
Model	NS-RMT2D18
Category	Universal Remote
Language	English