PACKAGE CONTENTS
• 2-Device Universal Remote
• Quick Setup Guide
FEATURES
• Works with a TV and a set-top
box
• Programming by popular brand
names for quick and easy setup
• Extensive code library for less
common brands and devices
• Premium design, materials, and
construction for rugged use
INSTALLING BATTERIES
• Insert two AAA batteries (not
included) into the remote. Make
sure that the + and – symbols
match the + and – symbols in
the battery compartment.
Note: To set up your remote, follow the
setup steps below, in order, and STOP as
soon as your remote works correctly.
PROGRAMMING YOUR
REMOTE
There are three ways to set up your
remote:
• Use “Setup method A: Popular
brands” for pre-set popular brands.
• Use “Setup method B: Direct
code entry” if your device’s direct
code is located on the back page.
• Use “Setup method C: Code
search” to perform a code search
for your device.
Note: This remote comes pre-set for
Insignia TVs and DIRECTV set-top boxes.
Setup method A: Popular
brands
1 Turn on your target device.
2 Press and hold SETUP until your
remote’s LED blinks twice.
3 Press
TELEVISION or
CABLE / SATELLITE /
STREAMING to select the mode
you want to set up. The LED stays
lit.
4 Press either 0 (for streaming/
cable/satellite) or 1 (for TVs) to
select the device type you want
to set up.
To Next Page
Loading...
Need help?
General
