10
www.insigniaproducts.com
BLURAY and DVD
1 Turn on your device and point your Insignia
universal remote control at it (if you are setting up a
streaming device, make sure a movie or TV program
is playing).
2 Press the device button you want to set up (for
example TV).
3 Press and hold the SETUP button until the LED on
your remote button blinks twice.
4 Press and hold the number button for your brand
and device, as listed in the tables above (for
example, 3 for a Phillips TV). Your remote will send
the power signal every three seconds.
5 Release the button as soon as your device turns off.
The LED blinks twice and your remote will now
operate your device.
BRAND PRESS
LG, Sharp 1
Insignia 2
Panasonic 3
Philips, Magnavox 4
Pioneer 5
Samsung 6
Sony 7
Tos hib a 8
VIZIO, RCA 9
Yamaha 0
Note: If one or more buttons do not work as expected,
start again at step 2. Your remote will start with the next
code in memory.
To Next Page
Loading...
