14
www.insigniaproducts.com
function as your original remote. However, you can
reprogram them so that when the buttons are held
down for three seconds they send a channel number,
then when held down again for three seconds, they
will send another channel number. You can group
these channels by genre, such as sports, news, movies,
and kids.
Adding channel shortcut macros
For example, if the first three sports channels are 200,
201, and 239, you can assign shortcuts to these
channels on the red (Sports) button.
1 Select the device you normally use to watch live TV.
For example, the STB button to select your set top
box.
2 Hold down the SETUP button and the red (Sports)
button until the LED blinks twice.
3 Enter the first channel number. In this case, 200.
4 Press and release the red (Sports) button.
5 Enter the next channel number. In this example
201.
6 Press and release the red (Sports) button again.
7 Repeat steps 3 and 4 for each channel shortcut you
want to add.
8 After entering the last channel number you want,
press and hold the SETUP button. The LED blinks
twice and the shortcuts are now programmed.
When watching live TV, hold down the red (Sports)
button for three seconds and the first programmed
channel is selected (in this example channel 200). Hold
down the red (Sports) button again for three seconds
and the next programmed channel is selected (in this
example channel 201).
To Next Page
Loading...
Need help?
General
