16
NS-RNE4BWH8-C/NS-RNE4BSS8-C
www.insigniaproducts.com
Control graphics
Temperature conversions
Power outage
If a flashing time is in the display, you have experienced a power failure.
Reset the clock.
To reset the clock, touch the CLOCK pad. Enter the correct time of day by
touching the + or – pads. Touch the START/ON pad.
12 Cook Time Pad/light
(on some models)
Touch this pad and then touch the + or – pads to set the amount of time you want your
food to cook. The oven will shut off when the cooking time has run out.
Flashes while in edit mode–you can change the set time at this point. Glows when the
function has been activated. Flashes again when the time has run out until the control
is reset.
13 Automatic Oven Light
(on some models)
This lights anytime the oven has been programmed using the COOK TIME or START
TIME functions.
14 Start Time Pad/light
(on some models)
Use along with the COOK TIME or CLEAN pads to set the oven to start and stop
automatically at a time you set.
Flashes while in edit mode–you can change the start time at this point. Glows when
the function has been activated.
Indicator Lights (on
some pads)
EDIT mode lasts several seconds after the last pad press. START TIME and COOK TIME
will be the only pads lit if either of these options is selected. (Example: START TIME is
selected with BAKE–the START TIME pad will remain lit until the clock reaches the
programmed time, at which point it will turn off and the BAKE pad light will light up.)
Fahrenheit°
140 150 170 200 250 275 300 325 350 375 400 425 450 475 500 525 550
Celsius°
60 65 75 95 120 135 150 160 175 190 205 220 230 245 260 275 290
# ITEM FUNCTION
Horloge
Clock
Minuterie
Timer
Clean
Off
Nettoyage
Arrêt
Broil
Grill
Start /on
Bake
Cuire Départ
NS-RNE4BWH8-C_17-0680_User MAN_V2_ENG.fm Page 16 Monday, September 18, 2017 1:12 PM
To Next Page
Loading...
