23
4-Burner Electric Range
www.insigniaproducts.com
Using the clock and timer
(on some models)
To set the clock
The clock must be set to the correct time of day for the automatic oven
timing functions to work properly. The time of day cannot be changed
during a timed baking or self-cleaning cycle.
1 Touch the CLOCK pad twice.
2 Touch the + or – pads.
If the + or – pads are not touched within one minute after you touch
the CLOCK pad, the display reverts to the original setting.
If this happens, touch the CLOCK pad and reenter the time of day.
3 Touch the START/ON pad until the time of day shows in the display.
This enters the time and starts the clock.
To check the time of day when the display is showing other
information, simply touch the CLOCK pad. The time of day shows until
another pad is touched.
To Turn Off the Clock Display
If you have several clocks in your kitchen, you may wish to turn off the
time of day clock display on your range.
1 Touch the CLOCK pad once to turn off the time of day display.
Although you will not be able to see it, the clock maintains the correct
time of day.
2 Touch the CLOCK pad again to recall the clock display.
To Next Page
Loading...
