19
4.1 Cu. Ft. Top-Load Washer
www.insigniaproducts.com
INSTALLATION INSTRUCTIONS
Step 3: Connect the drain hose
1 Find the end of the drain hose that has the clamp or hoop, then slide the clamp or hoop toward the hose.
2 Insert the end of the hose with the clamp or hoop onto the washer’s drain pipe. Make sure that the hose
completely covers the end of the drain pipe.
3 Move the clamp or hoop toward the drain pipe so the drain hose fits tightly onto the pipe.
Caution
• Failure to slide the drain hose completely over the washer’s drain pipe
may result in water leakage.
• Failure to move the clamp or hoop onto the washer’s drain pipe will
result in water leakage.
NS-TWM41WH8A_17-0655_MAN_V2_EN.fm Page 19 Friday, August 4, 2017 8:10 PM
To Next Page
Loading...
