50
NS-24ER310NA17/NS-24ER310CA17
NS-32DR310NA17/NS-32DR310CA17/NS-48DR510NA17
www.insigniaproducts.com
48" model
1 Make sure that your TV’s power cord is unplugged and the digital speaker system or sound bar is turned off.
2 Connect a digital optical audio cable (not provided) to the DIGITAL OUTPUT (OPTICAL) jack on the side of your TV
and to the digital optical AUDIO IN jack on the digital speaker system or sound bar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or sound bar.
5 To turn off your TV speakers, on the Home menu, press or to highlight Settings, then press OK. Highlight
Audio, then press OK. Highlight TV speakers, then press OK. Press OK to remove the check from the TV speakers
enabled check box.
Note
If your TV is the 24" or 32" model, go to 24" or 32" model on page 49.
Digital optical
audio cable
Digital speaker
system
Side of TV
Digital optical
audio cable
connector
Digital optical
audio jack
On your TV
Sound bar
To Next Page
Loading...
Need help?
General
