Inspire BL1 User Manual

STEP 8
Attach Top Beam Plates (#13) and One 3 ½” Pulley (#37) to Upper Main Frame (#10) using:
Four (M10*100 Hex Bolts)
Two (1” Long barrel Spacers)
Finger Tighten Only
Attach Lat Bar Holders (#50) and One 3 ½” Pulley (#37) to Top Beam Plates (#13) Using:
One (M10*115 Hex Bolt)
One (M10*100 Hex Bolt)
One (3” Spacer Tube)
Two (1” Long barrel Spacers)
Finger tighten bolts only. No not wrench tighten until after step 9.
Page 11
12/11
10

Inspire BL1 Specifications

General

Brand	Inspire
Model	BL1
Category	Home Gym
Language	English