Inspire BL1 User Manual

STEP 9
Attach Press Arm Mount (#14) to Top Beam Plates (#13) using: One (M12*100 Hex Bolt)
Wrench Tighten bolt #88 so there is a slight drag when moving Press Arm Mount.
Do not over tighten .
Wrench tighten all bolts installed in Step 8.
Attach Pop-Pin Shaft (#47) to Upper Main Frame (#10)
Thread Completely and Wrench Tighten.
Page 12
12/11
13
10

Inspire BL1 Specifications

General

Brand	Inspire
Model	BL1
Category	Home Gym
Language	English