Inspire M3 - Page 18

Ab Frame Assembly
2 – 2” Hex Bolts
4 – 3/8” Flat Washers
Ab Arm 2 – 3/8” Lock Nuts
STEP 13
STEP 14
2 – 2” Hex Bolts
4 – 3/8” Flat Washers
2 – 3/8” Lock Nuts Ab Arm
Upright Supports
Step 13: Attach Ab Arms to Upright Supports using:
Two (3/8” x 2” Hex Bolts)
Note: Wrench Tighten Now Four (3/8” Flat Washers)
Do Not Over Tighten Two (3/8” Lock Nuts)
Step 14: Attach Ab Frame Assembly to Ab Arms using:
Two (3/8” x 2” Hex Bolts)
Note: Wrench Tighten Now Four (3/8” Flat Washers)
Do Not Over Tighten Two (3/8” Lock Nuts)
Page 15