Inspire M3 User Manual

STOP! – Proceed only if you want weight stack to face right as shown.
This page shows how to attach the weight stack facing right. If you
would like the weight stack to face left, skip steps 43 – 49 in this
manual and go directly to the addendum that accompanies this owner’s
manual.
Guide Rods
2 – 3” Hex Bolts
4 – 3/8” Flat Washers
2 – 3/8” Lock Nuts
Lower Guide Rod Mount
2 – 2 ¾” Hex Bolts
4 – 3/8” Flat Washers
2 – 3/8” Lock Nuts
Main Upright
Step 43: Attach Lower Guide Rod Mount to Main Upright using:
Two (3/8” x 3” Hex Bolts)
Four (3/8” Flat Washers)
Two (3/8” Lock Nuts)
Step 44: Attach Guide Rods to Lower Guide Rod Mount using:
Two (3/8” x 2 ¾” Hex Bolts)
Four (3/8” Flat Washers)
Two (3/8” Lock Nuts)
NOTE: Wrench Tighten Steps 43-44 Now.
Page 26
STEP 43
STEP 44

Inspire M3 Specifications

General

Resistance Type	Weight Stack
Weight Capacity	300 lbs
Color	Black
Frame	Steel
Finish	Powder coat
Material	Steel
Included Accessories	Lat Bar
Exercises	Chest Press, Incline Press, Decline Press, Lat Pulldown, Seated Row, Leg Extension, Leg Curl, Preacher Curl, Ab Crunch
Press Arm	Adjustable