Inspire M3 User Manual

Selector Stem/ Install Rubber Donuts,
Top Weight Weight Stack, Top Weight/
Selector Stem. (In That Order)
Weight Stack
Rubber Donuts
Front of Weight Plate has recessed area
Bottom of Weight Plate has
three feet.
Step 46: Slide Rubber Donuts down the Guide Rods until sitting on the Shroud Plate. Next,
slide each plate down the Guide Rods until all 20 Weight Plates are resting on the
Rubber Donuts. Be sure that all weight plates are facing forward. Front of plate is
signified by recessed area for weight stack numbers. Next, slide Top Weight/Selector
Stem down the Guide Rods and onto weight stack. Finally, connect Cable to Top
Weight by threading cable bolt into it.
Cable Bolt must be threaded all the way into selector stem with Jam Nut tightened.
Page 28
STEP 46

Inspire M3 Specifications

General

Resistance Type	Weight Stack
Weight Capacity	300 lbs
Color	Black
Frame	Steel
Finish	Powder coat
Material	Steel
Included Accessories	Lat Bar
Exercises	Chest Press, Incline Press, Decline Press, Lat Pulldown, Seated Row, Leg Extension, Leg Curl, Preacher Curl, Ab Crunch
Press Arm	Adjustable