Can be used with GO 3 or the
Action Pod.
How to Use:
1. Press the buckles on the
two sides of the Pivot Stand
and attach GO 3 or the Action
Pod onto it. Make sure the
camera's direction is the same
as the camera mark on the
Pivot Stand.
2. Remove the silicone
protective cover from the base
of the Pivot Stand and stick the
Pivot Stand onto a clean, flat
surface.
Stick to a flat, clean surface.
Press firmly for 10 seconds
after sticking and leave it for
around 30 minutes before use.
To Next Page
Loading...
