Insta360 ONE RS User Manual

5
Camera Assembly
4K Boost Standard Build
4K Boost Selfie Build
360 Build
Assembly steps:
1. Align the holes on the sides of the lens to the points on the core and press the
two together until they firmly connect.
2. Align the already assembled core and lens to the connecting points of the battery
base. Then press the two parts together until they firmly connect.
Tip:
• Avoid disassembling or storing a
disassembled ONE RS in high humidity
environments, as camera could be
damaged.
• To remove the battery base, push the
battery buckle to the right, then pull the
battery base off.
Battery buckle

Insta360 ONE RS Specifications

General

Bluetooth	Yes
Product color	Black
ISO sensitivity	100, 125, 160, 200, 250, 320, 400, 500, 640, 800, 1000, 1250, 1600, 2000, 2200, 2250, 2500, 3200
Wi-Fi frequency	5 GHz
Camera interface	USB Type-C
Bluetooth version	5.0
Fixed focal length	6.52 mm
Maximum aperture number	2.2
Operating temperature (T-T)	-20 - 40 °C
Fastest camera shutter speed	1/8000 s
International Protection (IP) code	IPX3
HD type	-
Video resolutions	3840 x 1920 pixels
Maximum frame rate	50 fps
Video formats supported	INSV
Maximum video resolution	6144 x 3072 pixels
Image formats supported	INSP, RAW
Maximum image resolution	6528 x 3264 pixels
Storage media	Memory card
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	1000 GB
Audio formats supported	AAC
Virtual Reality (VR) ready	No
Power source	Battery
Battery capacity	1350 mAh
Battery life (max)	1 h
Mobile operating systems supported	Android, iOS

Weight and Dimensions

Depth	129.3 mm
Width	53.2 mm
Height	49.5 mm
Weight	239 g