2.
Under this menu
,
you can view the amount of available capacity
/
residual capacity information of storage devices
inserted in the current camera
.
Press
"
Power
"
to click on a storage device into the next step to be formatted
,
and
then the camera will remind you whether to proceed with formatting
,
continue to click on
"
Power
"
to confirm and
then it will start to format the selected storage device
.
(
Please note that before formatting
,
you must backup the
original data on storage devices and the data cannot be restored once formatting completes
.
)
(
1
)
Once formatted
,
if you are prompted by Formatted success
,
it means that formatting succeeds
.
(
2
)
If it shows
"
Formatted completed with fragments le
"
,
it means formatting is completed
,
but there are still some
file fragments existing
.
The SD card cannot be formatted into the required format
,
please contact the manufacturer of
the card to fix it or replace it with a new card
.
3.
Once formatting is completed
,
if it prompts
"
Failed
"
,
it represents a format failure
.
Please check whether the change
storage device
’
s write
-
protection is turned on or it has been corrupted
.
Please try formatting again a
er you remove
write
-
protection
.
4.
Titan camera can format the
8
SD cards together at the same time
.
Choose any one of the SD cards and proceed to
the next step
.
There will be two selections for you to choose
:
format this card to exFat or format all devices to exFat
.
If in the operation of Titan
,
the camera body is overheating
,
please stop shooting and place it in ventilated environment
.
A
er waiting for the camera temperature becomes normal
,
you can use it again
,
or use other equipment to cool it down
.
7.4.4
Noise or no sound for external microphone
Noise problem
:
To Next Page
Loading...
