PRODUCT CLEANING
It is recommended to wash at least once a week to remove dirt and hair, and to change the water thoroughly
to prevent the filter tank from coggling and causing poor water quality or poor water output.
5. Clean the inner wall of the
water storage bucket and dry
the outer wall of moisture
6. When the filter groove is
installed back on the top cover,
check whether the bayonet is
close
1. Remove the water storage top
cover and dean the top cover dirt
2. Gently remove the filter element
and filter groove
3. Clean the filter element tank to
remove hair dirt
4. Clean the water pump to
remove the hair dirt in the
crevice
9
To Next Page
Loading...