Instant Pot Omni Pro - Step-by-Step Probe Cooking Guide; Probe Insertion and Oven Setup; Selecting Programs and Adjusting Temperatures; Real-time Temperature Monitoring

Cooking
01 Insert the metal probe horizontally
into the thickest part of the food.
( First, remove the probe cap. Always
insert the complete metal part of the
probe into the food to ensure optimal
accurate temperature measurement.
02 Place your dish into the cooking
chamber with the probe's plug on the
right side.
03 Insert the probe plug fully and firmly
into the socket located on the right
wall of the cooking chamber. Close
the door.
04 Select the smart program you want to
use: Air Fry, Roast or Bake.
Touch Probe and use the + / - keys to
adjust the target internal temperature.
05 Use the +/- keys to adjust the target
internal temperature.
(F See Probe cooking temperatures for
more information.
06 Touch Oven to go to the cooking
temperature field.
Oven
N\
07 Use the +/- keys to adjust the oven's
cooking temperature.
08 Touch Start to begin.
The display shows On throughout
cooking.
Probe
N
Touch Probe to show the current
and target internal temperatures in
real time.
Touch Oven to show the target
cooking temperature.
09 The Omni Pro beeps and shows End
when your food reaches the target
internal temperature.
10 Using proper hand protection, unplug
the probe from the oven, then remove
your food from the cooking chamber.
Position the probe and its cord as far from the heating elements as possible.
instanthome.com | 17