EasyManua.ls Logo

Instant POT DUO - Cleaning and Maintenance; Cleaning Accessories and Lid Components; Cleaning the Inner Cooking Pot

Instant POT DUO
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
User Manual
CLEANING
Clean your Duo after each use. Always unplug the unit and let all parts
cool to room temperature before cleaning. Before use or storing, make
sure all surfaces are dry.
Part Cleaning instructions
Accessories
Steam/Egg Rack
Condensation
Collector
Wash after each use
Hand wash with hot water and mild dish soap or wash
in dishwasher, top rack
Never use harsh chemical detergents, powders or
scouring pads on accessories
Empty and rinse condensation collector after each use
Lid and Parts
Anti-Block Shield
Sealing Ring
Steam Release
Valve
Float Valve
Silicone Cap
Hand wash with hot water and mild dish soap or wash
in dishwasher, top rack
Remove all small parts from lid before washing.
With steam release valve and anti-block shield removed,
clean interior of steam release pipe to prevent clogging.
To drain water from the lid after dishwashing, grasp the
lid handle and hold the lid vertically over a sink, then
turn it all the way around
After cleaning, store the lid upside down on the
cooker base
Store sealing rings in a well-ventilated area to
disperse odor
To eliminate odors from sealing ring, add 1 cup (8 oz /
250 mL) water and 1 cup (8 oz / 250 mL) white vinegar
to cooking pot, and run Pressure Cook for 5–10 minutes,
then use Quick Steam Release
Inner Cooking pot Wash after each use.
Hand wash with hot water and mild dish soap or wash
in dishwasher*
Hard water stains may need a vinegar-dampened
sponge and scrubbing to remove
For tough or burned food residue, soak in hot water
for a few hours before cleaning
Dry all exterior surfaces before placing in cooker base

Other manuals for Instant POT DUO

Related product manuals