5
Get Started
All Smart Programme cooking times and temperatures are restored
to the factory default setting.
Cancel active cooking programme
You can cancel any cooking programme at any time.
• While in Standby, Preheating or active cooking programme, press
Cancel. Depending on the temperature of the unit, the internal fan
may keep running to cool the unit.
INITIAL SET UP
Unpack
3. Remove your new Vortex Plus from the box.
4. Remove all the packaging material from in and around
the air fryer.
5. Make sure to remove all the accessories from inside the cooking
chamber.
6. Don’t remove the safety warning stickers or the rating label from
the air fryer.
Clean before use
1. Wipe the interior with a damp cloth. Use a clean, soft clothŁto dry.
2. Wash the accessories with hot water and dish soap. RinseŁwith
warm, clear water and use a soft cloth to dry. See page 10 for
more details.
Placement
1. Place your Vortex Plus on a stable, level surface, away from
combustible material and external heat sources. Do not place your
Vortex Plus on top of another appliance.
2. Make sure to leave at least 13 cm of space above and around all
sides of the appliance to allow for sufficient air flow.
To Next Page
Loading...
Need help?
General