Instanta CPF4100-3 - Regular Daily Use; Filter Replacement; Filter Replacement Procedure

• Similarly, set the DAY of the week
(e.g. Sun=1, Mon=2, Tue=3 etc).
• To exit user menu, press & hold ECO
button for approximately 5 seconds then
release. (Screen will show “WAIT” whilst any
changes are being saved).
To Enable and Set-up Seven-day Timer –
see page 8
Eco Mode/Power Saving
The ECO mode is activated by pressing the ECO
button (leaf symbol). The screen changes to
Green. This saves energy by switching the boiler
operating capacity to half volume, ideal on quiet
days in the season. Simply push the ECO button
again to revert to full capacity.
Regular Daily Use
Switch boiler on and wait for the screen to turn
white and show “READY” message. The water
will then be at the correct temperature.
Dispense water via the lever tap.
(CAUTION: Boiler dispenses near-boiling water).
AQ35 Multi-Filter
Instanta’s new built-in ltration system ensures
that water is always to the highest standard,
whilst delivering lower maintenance costs and
improved energy eciency.
Quick and easy to change, the new lter reduces
sediment, chlorine taste & odour, and lime-scale
via a slow release scale inhibitor, providing
better water and therefore, better quality drinks.
Filter Replacement:
A series of bars on the FILTER display shows
the estimated remaining life in the current lter
cartridge. When the lter has just 200 Litres
remaining (or a period of 6 months has expired),
the lter icon will begin to ash as a reminder.
When the lter needs replacing, the screen will
show the message; CHANGE FILTER.
The boiler will continue to operate with the
CHANGE FILTER screen but scale may build
up more rapidly and the water taste may be
aected.
Replace the lter as follows;
1. Switch boiler o and draw down water to tap
level.
2. Open lter door
3. Grip Cartridge and rotate a quarter-turn to
the left and pull forward. CAUTION: A small
amount of water will drain from the head.
5