4
To Configure the PC for Auto Call Home
4 Start the most recent release of THOR. (See the software section of
http://www.instantel.com/system/files/thor_web_installer.zip)
5 Connect the Micromate unit to the PC. Confirm that the Micromate can
communicate with THOR. Connection Status should indicate Connected in THOR
NOTE: See THOR Operator manual for details on how to Add and connect to a unit in THOR
6 In the Unit Details area in THOR, under the Unit tab, click the Auto Call Home
Setup button. Then select if the unit is to call home after each event and/or if the unit
is to call home while monitoring.
To Next Page
Loading...
Need help?
General
