inStudio Prescott - Alarm Functions; Adjusting the Alarm Time; Wake to Buzzer, Radio, or CD Music; Stopping the Alarm

6
This unit allows you to set two different wake up times with the ALARM 1 and ALARM 2 buttons.
ADJUSTING THE ALARM TIME
1st Alarm (ALARM 1)
1. Press the STANDBY/ON button once to turn off the device.
2. PresstheALARM1buttononce.TheLEDALARM1lightsupand0:00flashesonthedisplay.
3. Then press the >>I / HOUR button to adjust hour (1-24).
4. Afterwards,presstheI<</MINUTEbuttontoadjustminutes.
5. Toconclude,presstheALARM1buttonagain.
2nd Alarm (ALARM 2)
1. Press the STANDBY/ON button once to turn off the device.
2. PresstheALARM2buttononce.TheLEDALARM2lightsupandand0:00flashesonthedisplay.
3. Then press the >>I / HOUR button to adjust hour (1-24).
4. Afterwards,presstheI<</MINUTEbuttontoadjustminutes.
5. Toconclude,presstheALARM2buttonagain.
Wake to Buzzer
Select with the function selector BUZZER/AM/FM/CD the option BUZZER after wake up time is set.
Wake to Radio
1. Follow procedures under Radio to select your desired radio station.
2. Press the STANDBY/ON button once to turn off the device.
3. Select the desired radio frequency band AM or FM with the function selector BUZZER/AM/FM/CD.
4. Set desired volume.
5. Follow procedures under Adjusting the Alarm Time to set the wake up time.
Wake to CD Music
1 Follow procedures under CD.
2. Press the STANDBY/ON button once to turn off the device.
3. Select with the function selector BUZZER/AM/FM/CD the option CD.
4. Set desired volume.
5. Follow procedures under Adjusting the Alarm Time to set the wake up time.
Note:
If the alarm sound is not stopped manually by the button SNOOZE or STANDBY/ON the system will turn off
the alarm sound after 60 minutes.
Stopping the Alarm
The alarm is programmed to run for 60 minutes.
1. PresstheSNOOZEbuttontostopthealarmtemporarily,thealarmwillstopandringagainautomatically
after 6 minutes.
2. PresstheSTANDBY/ONbuttontostopthealarmtemporarily,thealarmwillsoundagain24hourslater.
3.Toturnoffthealarmpermanently,presstheALARM1orALARM2button,thealarmLEDindicatorswill
turn off.
Sleep Mode
1. Select your desired mode to be used by the sleep function.
2. PressSLEEPbutton,theLEDSLEEPlightsupundthedevicewillgotothesleepmode.
3. Press SLEEP button again to select the desired sleep time (4 possibilities: 90 - 60 - 30 - 15 minutes).
4. TurnoffthesleepfunctionbypressingSLEEP,untiltheLEDindicatorSLEEPturnsoff.
Alarm Functions