TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Key Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Device Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Programming Device Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Setting Up a Combo Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Searching for Your Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Checking the Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using Learning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Learning Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Programming a Learned Key . . . . . . . . . . . . . . . . . . . . . . . . . 14
Deleting a Single Learning Key. . . . . . . . . . . . . . . . . . . . . . . . 15
Deleting All Learned Keys in a Specific Mode . . . . . . . . . . . . 16
Programming Channel Control Lock . . . . . . . . . . . . . . . . . . . . . . . . 16
Unlocking Channel Control. . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Locking Channel Control to STB . . . . . . . . . . . . . . . . . . . . . . . 17
Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Unlocking Volume Control for a Single Device (Individual
Volume Unlock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Unlocking All Volume Control (Global Volume Unlock) . . . . . 18
Locking Volume Control To One Mode (Global Volume Lock) 19
Programming ID Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Programming Macro Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Programming a Macro Key. . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Clearing a Macro Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Using the Master Power Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Programming the Master Power Key . . . . . . . . . . . . . . . . . . . 21
Using the Master Power Key. . . . . . . . . . . . . . . . . . . . . . . . . . 22
Clearing the Master Power Key . . . . . . . . . . . . . . . . . . . . . . . 22
Re-Assigning Device Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Clearing Custom Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
FCC Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Manufacturer’s Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Setup Codes for Audio Amplifiers. . . . . . . . . . . . . . . . . . . . . . 27
Setup Codes for Audio Receivers . . . . . . . . . . . . . . . . . . . . . . 27
Setup Codes for Audio Accessories . . . . . . . . . . . . . . . . . . . . 30
Setup Codes for Cable Boxes/Converters . . . . . . . . . . . . . . . 30
Setup Codes for DVD Players . . . . . . . . . . . . . . . . . . . . . . . . . 32
Setup Codes for DVD Recorders. . . . . . . . . . . . . . . . . . . . . . . 37
Setup Codes for DVD Combos. . . . . . . . . . . . . . . . . . . . . . . . . 37
Satellite Receivers and DVR/PVR Systems. . . . . . . . . . . . . . . 37
Setup Codes for Satellite Receivers . . . . . . . . . . . . . . . . . . . 37
Nebula Potenza ST.fm Page 2 Monday, October 15, 2007 4:55 PM
www.urcsupport.com
9
INSTALLING BATTERIES
1. On the back of the remote control, push the
tab and lift off the battery cover.
2. Locate the two (2) enclosed AA batteries.
Match the + and - marks with those in the
battery case, then insert them.
3. Align the covers keys with the cases holes and
press the cover back into place. The tab should
click when the cover is locked.
NOTE: When batteries need replacement, the remote
control will cease to operate. Replace the
batteries and the unit will be restored to its
full functionality, complete with your favorite
settings.
PROGRAMMING DEVICE CONTROL
The Potenza ST Universal Remote Control is
preprogrammed to operate the set-top box provided by
your television service provider, an RCA TV, a Toshiba
DVD player, an RCA VCR, and a Pioneer audio receiver.
To control devices other than the default brands,
perform the following steps; otherwise skip this section.
4. Test the remote control by pressing any mode
key (e.g., TV). If the batteries are inserted
correctly, the LED (red light) will blink once.
1
3
2
Nebula Potenza ST.fm Page 9 Monday, October 15, 2007 4:55 PM
Integra Telecom
4690 Colorado St SE I Prior Lake, MN 55372
952.226.7000 I www.getintegra.com
REMOTE CONTROL SET-UP INSTRUCTIONS
TIP:
If you purchased a new TV or received
a new remote control, an easy way to
program your remote to control your TV,
is by searching for the proper code.
See page 12 for instructions.
To Next Page
Need help?
General