Integra Codman 901001ESUO - Page 7

EN - ENGLISH
7
CONTROLS, INDICATORS & CONNECTIONS
7. COAG Display Screen
The screen shows the output power seing for COAG (MONOCOAG or BICOAG, depending on which Operating Mode
Buon is activated).
8. COAG Output Power Seing Knob
Turning the output power seing knob clockwise increases the power seing and turning it counterclockwise decreases
the power seing of the Generator. The seing is visible on the COAG Display Screen.
9. Neutral Electrode Receptacle
The neutral electrode receptacle accepts the international rectangular connection.
10. “Neutral Electrode not connected” Indicator Light
If the light is illuminated and flashing red, the Neutral Electrode is not properly connected to either the Generator or the
patient.
11. Bovie and 3-Pronged Monopolar Receptacle
The Monopolar receptacle accepts either a bovie connection or 3-pronged connection cord for use with monopolar
instruments.
12. Bipolar Receptacle
The Bipolar receptacle accepts a Codman bipolar cord for use with bipolar instruments. (See Recommended Accessories
section for product codes.)