8
Sterilizing the System
Packaging the Handpiece and Components for Sterilization
The handpiece and components need to be packaged for sterilization. Integra provides a 23 kHz and 36 kHz sterilization tray for each
of its corresponding handpieces
The provided trays are intended to protect the CUSA Clarity Handpiece, EUT, and Torque Base during steam sterilization and during
transfer to the sterile field. The handpiece and components must be cleaned prior to sterilization, see “Cleaning the Handpiece, EUT,
Sterilization Tray, and Torque Base” on page 6.
Sterilization Tray Layout
➀
Handpiece
➄
Flue and Stylet
➁
Handpiece Cable Posts
➅
Torque Base
➂
Handpiece Connector
➆
EUT Slots (3)
➃
Nosecone
➇
Lid (Not shown)
23 kHz Sterilization Tray Layout 36 kHz Sterilization Tray Layout
➀
➁
➂
➄
➅
➆
➀
➁
➂
➃
➅
➆
➃
To Next Page
Loading...
