Integra DPC-7.7 - Plug the Supplied Power Cord into the AC INLET

22
Connecting the DPC-7.7—Continued
• Do not use a power cord other than the one supplied
with the DPC-7.7. The power cord supplied is
designed for use with the DPC-7.7 and should not be
used with any other device.
•Never have the power cord disconnected from the
DPC-7.7 while the other end is plugged into the wall
outlet. Doing so may cause an electric shock. Always
connect by plugging into the wall outlet last and dis-
connect by unplugging from the wall outlet first.
Plug the supplied power cord into the
AC INLET