11
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Front Panel≫ Rear Panel≫ Remote≫
Remote Controller
1. On/Standby button
2. Input selector buttons: Switches the input to be played.
3. Q (Quick Menu) button: Pressing this button during playback can make
settings such as "Tone" and "Level" quickly on the TV screen while playing.
( p136)
4. Cursor buttons and Enter button: Select an item with the cursors, and press
Enter to conrm your selection. Pressing / can switch the screen when a
music folder list or le list is not displayed on one screen on the TV.
5. button: Display advanced setting items on the TV or the display to have a
more enjoyable experience with this unit. ( p104)
6. VOLUME buttons
7. button: Temporarily mutes audio. Press the button again to cancel muting.
8. Listening Mode button: Select a listening mode ( p90).
Main/Zone 2/Zone 3 button: Control the multi-zone function ( p84).
9. Play buttons: Used for playback operations for the Music Server ( p72) or
USB device ( p69).
10.
button: Used for repeat/random playback operations for the Music
Server ( p72) or USB device ( p69). Each time you press the button,
the mode switches in the order of (1-track repeat), (folder repeat), and
(random).
Clear button: Deletes all characters you have entered when entering text on
the TV screen.
11.
button: Switches the information on the display and is used to operate RDS
( p83).
12.
button: Returns the display to the previous state while setting.
13.
Mode button: Used to switch between automatic tuning and manual tuning for
AM/FM stations ( p79), or operate the multi-zone function ( p84).
14.
Memory button: Used to register AM/FM radio stations. ( p81)
Tips
If the remote controller does not work: The
remote controller may have switched to the ZONE
control mode. While pressing and holding Mode,
press the Main button for 3 seconds or more until the
remote indicator blinks once, and then switch it to
the main room control mode.
To Next Page
Loading...
