59
Insert batteries
Insert 4 AA batteries according to the picture on the inside of the
battery compartment.
Touch the screen to start
To turn on the screen, tap it gently with your finger.
To use the touchscreen, simply tap the images you see on the screen.
There’s no need to turn the screen off — it shuts off automatically to
save power.
Be sure to read the manual for important information about care and
use of the touchscreen.
Operate your components
Fresh out of the box, the remote controller is already set up to work
with popular components made by Integra/Onkyo. Programming the
remote controller is easy: Add components to the Device menu as
necessary. Then, program the commands to the remote controller for
the components. For instructions, refer to the manual.
1. Home
If you get lost, you can always go to the Home menu screen. Just
tap Home.
2. Tap name of component to display component’s
control panels.
Quick Start
3. You can also use the Device menu; tap to display it.
4. Tap to scroll to next panel for this component.
Battery compartment
cover slides off
1
2
4
3
Using the remote controller
To Next Page
Loading...
Need help?
General
