Integra VIAFLO Series User Manual

VIAFLO Pipettes – Operating instructions V05 Introduction
www.integra-biosciences.com 7
1 Introduction
These operating instructions contain all the information required for installation, operation
and maintenance of the VIAFLO Electronic Pipettes. This chapter informs about the
symbols used in these operating instructions, the intended use of the VIAFLO Electronic
Pipettes and the general safety instructions.
1.1 Symbols used
The operating instructions specifically advise of residual risks with the following symbols:
W
ARNING
This safety symbol warns against hazards that could result in injury. It also
indicates hazards for machinery, materials and the environment.
It is essential that you follow the corresponding precautions.
CAUTION
This symbol cautions against potential material damage or the loss of data in
a microprocessor controller. Follow the instructions.
N
OTE
This symbol identifies important notes regarding the correct operation of the
device and labour-saving features.
1.2 Intended use
VIAFLO Electronic Pipettes are microprocessor controlled and stepper motor driven
pipettes. They are used for aspirating and dispensing liquids in the volume range of 0.5 -
5000 µl using GripTip pipette tips.

Integra VIAFLO Series Specifications

General

Pipetting Channels	8, 12, 16
Volume Range	0.5 µl - 1250 µl
Pipetting Modes	Dilution
Connectivity	USB
Power Supply	AC adapter
Applications	PCR, ELISA
Accuracy	≤ 1%