- 16 -
User Information
in accordance with art. 13 of the Legislative Decree of 25th July 2005, no. 15 ”Implementation of Directives 2002/95/EC, 2002/96/EC
and 2003/108/EC, relative to reduction of the use of hazardous substances in electrical and electronic equipment, in addition to waste
disposal”.
The crossed bin symbol shown on the equipment indicates that at the end of its working life the product must be
collected separately from other waste.
The user must therefore take the above equipment to the appropriate differentiated collection centres for electronic and
electro technical waste, or return it to the dealer when purchasing a new appliance of equivalent type, in a ratio of one
to one.
Appropriate differentiated waste collection for subsequent recycling, treatment and environment-friendly disposal of the discarded
equipment helps to prevent possible negative environmental and health effects and encourages recycling of the component materials
of the equipment.
Illegal disposal of the product by the user will be punished by application of the administrative fines provided for by the legislative
decree no. 22/1997 (article 50 and following of the legislative decree no. 22/1997).
Declaration of Conformity - User Information
With the present declaration, we certify that the following products :
INTEK MT-4040D
comply with all the technical regulations applicable to the above mentioned products
in accordance with the EC Directives 2006/95/EC, 2004/108/EC, 99/5/EC.
Type of product : LPD / PMR 446 Transceiver
Details of applied standards : EN 300 220-1, EN 301 489-1-3, EN 60065
EN 300 296, EN 301 489-5, EN 60065
INTEK MT-4040P
comply with all the technical regulations applicable to the above mentioned products
in accordance with the EC Directives 2006/95/EC, 2004/108/EC, 99/5/EC.
Type of product : PMR 446 Transceiver
Details of applied standards : EN 300 296, EN 301 489-5, EN 60065
Manufacturer : INTEK S.R.L.
Via G. Marconi, 16
20090 Segrate (Mi)
Tel. 02-26950451 / Fax 02-26952185
E-Mail intek.com@intek-com.it
Notified Body : EMCCert Dr. Rasek
Boelwiese 5, 91320 Ebermannstadt
Germany
Identification Number : 0678
Contact Reference : Armando Zanni
Tel. 02-26950451 / Fax 02-26952185
E-Mail intek.com@intek-com.it
Segrate, 15/10/2004 dr. Vittorio Zanetti (General Manager)
DECLARATION OF CONFORMITY
EC Certificate of Conformity
(to EC Directive 2006/95, 2004/108, 99/5)
To Next Page
Loading...
