To install the battery
Please align the two battery slots with the fit runner on the lower side of
the transceiver.
Press the battery downward untill the locker placed on the rear side of the
radio hooks and fastens the battery.
To remove the battery
To remove the battery, press the battery locker placed on the rear side of
the radio and slide the battery away from the radio.
Warning !
Please do not waste used batteries into the environment and do not trash them with the common
garbage. Please use the dedicated case for the collection of used up batteries at your supplier.
Do not attempt to open or remove the battery casing.
Do not short the battery terminals or throw the used batteries into fire.
To install / to remove the belt clip
If necessary, attach the belt clip to the tranceiver, making it slide along the
fit runner placed on the rear side of the battery untill the lock will hook. To
remove the belt clip press the lock and slide the belt clip away from
the battery.
Preliminary Steps
- 5 -
English
To Next Page
Loading...
