Intel D845GRG

12 Intel Desktop Boards D845GRG and D845GBV
Quick Reference
The following table describes the jumper block settings for the BIOS Setup
configuration jumper.
BIOS Setup Configuration Jumper Block (J9H2) Settings
Jumper Setting Mode Description
3
1
Normal (default)
(1-2)
The BIOS uses the current configuration and
passwords for booting.
3
1
Configure
(2-3)
After the Power-On Self-Test (POST) runs, the
BIOS displays the Maintenance Menu. Use this
menu to clear passwords.
3
1
Recovery
(None)
The BIOS recovers data from a recovery
diskette in the event of a failed BIOS update.*
*To update or recover the BIOS, see the instructions in the Intel Desktop Boards D845EPT2
and D845EBG2 Product Guide on the Intel Express Installer CD-ROM
.
For a complete list of BIOS Setup settings, see:
• The Intel Dekstop Boards D845GRG and D845GBV Product Guide on the
Intel Express Installer CD-ROM
• The Intel World Wide Web Site at
http://support.intel.com/support/motherboards/desktop/