EasyManua.ls Logo

Intel D945GCCR User Manual

Intel D945GCCR
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background image
Intel Desktop Board D945GCCR Product Guide
20
Chassis Intrusion Detection
The board supports a chassis security feature that detects if the chassis cover has
been removed. The security feature uses a mechanical switch on the chassis that can
be connected to the chassis intrusion header on the desktop board. See
Figure 24 on
page
50 for the location of the chassis intrusion header.
Power Management Features
Power management is implemented at several levels, including:
Software support through the Advanced Configuration and Power Interface (ACPI)
Hardware support:
Power connectors
Fan headers
LAN wake capabilities
Instantly Available PC technology (Suspend to RAM)
+5 V standby power indicator LED
Wake from USB
Wake from PS/2 keyboard/mouse
Power Management Event signal (PME#) wakeup support
WAKE# signal wake-up support
ACPI
ACPI gives the operating system direct control over the power management and Plug
and Play functions of a computer. The use of ACPI with the desktop board requires an
operating system that provides full ACPI support.
Power Connectors
ATX12V-compliant power supplies can turn off the computer power through system
control. When an ACPI-enabled computer receives the correct command, the power
supply removes all non-standby voltages.
When resuming from an AC power failure, the computer returns to the power state it
was in before power was interrupted (either on or off). The computer’s response can
be set by using the Last Power State feature in the BIOS Setup program’s Boot menu.
The desktop board has two power connectors. See
Figure 23 on page 49 for the
location of the power connectors.

Table of Contents

Other manuals for Intel D945GCCR

Question and Answer IconNeed help?

Do you have a question about the Intel D945GCCR and is the answer not in the manual?

Intel D945GCCR Specifications

General IconGeneral
Form FactorMicro ATX
Socket TypeLGA 775
ChipsetIntel 945GC
Memory TypeDDR2
Memory Slots2
Maximum Memory4 GB
Onboard VideoIntel GMA 950
Audio CodecRealtek ALC888
LAN Speed10/100/1000 Mbps
Video OutputsVGA
Supported CPUIntel Core 2 Duo, Pentium D, Pentium 4
Memory Speed533 MHz
Expansion Slots2 x PCI
Storage InterfaceSATA 3 Gb/s
USB Ports8 x USB 2.0
AudioRealtek ALC888
Ethernet10/100 Mbps

Summary

Desktop Board Features and Components

Processor and Memory

Details on processor support, installation, and DDR2 memory configuration.

Chipset, Audio, and LAN

Features of the Intel 945GC chipset, onboard audio, and LAN subsystems.

I/O, Expansion, and Connectivity

Description of I/O controller, USB, IDE, SATA, and expansion slots.

BIOS, Security, and Power Management

BIOS functions, security, hardware monitoring, and power management features.

Installation and Replacement Procedures

Installation Precautions and System Board Handling

Important safety guidelines and precautions for component installation.

Processor and Memory Installation

Step-by-step guides for installing processors and memory modules.

Expansion Card and Cable Connections

Procedures for installing PCI Express cards and connecting IDE, SATA, and internal cables.

Front Panel, Fan, and Power Connections

Connecting front panel audio, USB, fans, and power supply.

BIOS Configuration and Password Management

Setting BIOS jumpers and clearing passwords.

Battery Replacement

Instructions for replacing the CMOS coin-cell battery.

BIOS Update and Error Handling

BIOS Update Procedures

Procedures for updating the BIOS using Intel Express and Iflash utilities.

BIOS Error Diagnostics

Explanation of BIOS beep codes and error messages during POST.

Regulatory Compliance Information

Safety, EU, and Ecology Standards

Details on safety regulations, EU conformity, and product ecology.

EMC Regulations and Product Certifications

Information on EMC compliance and various product certification marks.

Related product manuals