Intel Desktop Board DH61WW Technical Product Specification
52
Table 25. BIOS Setup Configuration Jumper Settings
Function/Mode Jumper
Setting
Configuration
Normal 1-2 The BIOS uses current configuration information and passwords for
booting.
Configure 2-3 After the POST runs, Setup runs automatically. The maintenance
menu is displayed.
Note that this Configure mode is the only way to clear the BIOS/CMOS
settings. Press F9 (restore defaults) while in Configure mode to
restore the BIOS/CMOS settings to their default values.
Recovery None The BIOS attempts to recover the BIOS configuration. A recovery CD
or USB flash drive is required.
To Next Page
Loading...
