Product Description
27
Item Description
A Rear surround
B S/PDIF out (optical)
C Center channel and LFE
(Subwoofer)
D Line in
E Line out/front speakers
F Mic in/side surround
Figure 4. Back Panel Audio Connectors
NOTE
The back panel audio line out connector is designed to power headphones or amplified
speakers only. Poor audio quality occurs if passive (non-amplified) speakers are
connected to this output.
For information about Refer to
The locations of the front panel audio header and S/PDIF audio header Figure 11, page 47
The signal names of the front panel audio header and S/PDIF audio header Section 2.2.2.1, page 49
The back panel audio connectors Section 2.2.1, page 46
To Next Page
Loading...
Need help?
General
