Intel® Packet Protect User’s Guide
24
To change the default behavior for a Packet Protect computer
1. Click Start > Settings > Control Panel.
2. Click Intel
Packet Protect. The Packet Protect Security tab appears:
3. To change the behavior for your computer, use the Behavior drop-down list
to choose one of these behaviors: Secure Responder, Secure Initiator, or
None.
4. To change the pre-shared key, type a new key in Pre-Shared key box.
5. When you are finished viewing and making changes in the Security tab,
click OK.
To Next Page
Loading...
