Microsoft* Windows* Installation and Configuration
Installing Windows Drivers and Software
NOTE: To successfully install or uninstall the drivers or software, you must have administrative
privileges on the computer completing installation.
Install the Drivers
NOTE: This will update the drivers for all supported Intel® network adapters in your system.
Before installing or updating the drivers, insert your adapter(s) in the computer and plug in the network cable.
When Windows discovers the new adapter, it attempts to find an acceptable Windows driver already installed
with the operating system.
If found, the driver is installed without any user intervention. If Windows cannot find the driver, the Found New
Hardware Wizard window is displayed.
Regardless of whether Windows finds the driver, it is recommended that you follow the procedure below to
install the driver. Drivers for all Intel adapters supported by this software release are installed.
1. Download the latest drivers from the support website and transfer them to the system.
2. If the Found New Hardware Wizard screen is displayed, click Cancel.
3. Start the autorun located in the downloaded the software package. The autorun may automatically start
after you have extracted the files.
4. Click Install Drivers and Software.
5. Follow the instructions in the install wizard.
NOTE: Intel® PROSet is installed by default when you install the device drivers.
Installing the Base Driver and Intel® PROSet on Nano Server
Driver Installation
NOTE: Installing drivers requires administrator rights to the operating system.
To install drivers on Microsoft* Windows Server* Nano Server:
1. Identify which drivers to inject into the operating system.
2. Create a directory from which to install the drivers. For example, C:\Nano\Drivers
3. Copy the appropriate drivers for the operating system and hardware. For example, "copy
D:\PROXGB\Winx64\NDIS65\*.* c:\Nano\Drivers /y"
4. If you are using the New-NanoServerImage module, use the above path for the -DriversPath para-
meter. For example, "New-NanoServerImage ...-DriversPath C:\Nano\Drivers"
5. If you are using DISM.exe as well, use the above path for the /AddDriver parameter. For example,
"DISM .../Add-Driver C:\Nano\Drivers"
To Next Page
Loading...
Need help?
General
