Intel® RAID Expander Card RES2SV240 Hardware User’s Guide 7
Figure 2. Installing Intel
®
RAID Expander Card RES2SV240
5. (Optional) In case power can be supplied remotely from RA 4-pin 12V/5V power
connector, the e
xpander card can be located elsewhere within the server chassis
instead of using a PCI Express slot, if only the cooling condition can meet the
expander card's thermal and atmospheric requirement. The expander card can
therefore be fastened by removing its bracket and fasten it to a customized chassis
wall (see Figure 3). The expander card already has two holes for fas
tening the
bracket and three
additional holds reserved. User needs to prepare screws
and
standoffs to match the hole size on both the expander card and customized
chassis wall.
AF003491
PCI Express* Slot
To Next Page
Loading...
