Intel S5500BCR - Figure 15. Removing the Processor Socket Protective Cover; Figure 16. Remove Processor Protective Cover; Figure 17. Install the Processor

Hardware Installations and Upgrades
Intel
®
Server Board S5520HC, S5520HCT, and S5500HCV Service Guide 27
Figure 15. Removing the Processor Socket Protective Cover
CAUTION
To avoid damage, DO NOT drop the cover onto the socket wires or components.
9. Take the processor out of the box and remove the protective shipping cover as shown in Figure 16.
Figure 16. Remove Processor Protective Cover
10. Orient the processor with the socket so the processor cutouts match the two socket pins and then sit the
processor into the socket as shown in Figure 17.
Figure 17. Install the processor
11. Close the load plate and socket lever: Close the load plate all the way as shown in Figure 18 (Step “A”),
push down on the load plate (Step “B” in Figure 18), and close the socket lever and ensure the load plate
tab engages under the socket lever when fully closed (Step “C” in Figure 18).