Intel S5500BCR - Figure 19. Installing Processor Heatsink(S); Figure 20. Locating Active Heatsink Cable Connections

Hardware Installations and Upgrades
30 Intel® Server Board S5520HC, S5520HCT and S5500HCV Service Guide
Figure 19. Installing Processor Heatsink(s)
5. Align the active heatsinks in the Intel
®
Server Chassis SC5650 and Intel
®
Server Chassis SC5600
(excluding Intel
®
Server Chassis SC5600LX) to let airflow go through to the center of the board (Step “B”
for active heatsink in Figure 19). Align the passive tower heatsinks (FXXRGTHSINK) fins to fit the Intel
®
Server Chassis SC5600LX air duct (Step “B” for passive heatsink in Figure 19).
6. Using a #2 Philips* screwdriver to tighten each fastener diagonally according to the white-circled numbers
in Figure 19. (Step “C” in Figure 19).
7. Securely re-tighten each fastener again in the same order as performed in Step 6. (Step “D” in Figure 19.)
Callout Processor Heatsink Connector Callout Processor Heatsink Connector
A. CPU_1 B. CPU_2
Figure 20. Locating Active Heatsink Cable Connections