Intel X550-T2 User Manual

PXE-EC8:
!PXE structure
was not found
in UNDI driver
code segment.
The Intel Boot Agent could not locate the needed !PXE structure resource. An
incorrect flash image is installed or the image has become corrupted. Try to update
the flash image.
This may also be caused by the system BIOS assigning a 64-bit BAR (Base
Address Register) to the network port. Running the BootUtil utility with the -64d
command line option may resolve this issue.
PXE-EC9:
PXENV + struc-
ture was not
found in UNDI
driver code seg-
ment.
The Intel Boot Agent could not locate the needed PXENV+ structure. An incorrect
flash image is installed or the image has become corrupted. Try to update the flash
image.
PXE-M0F: Exit-
ing Intel Boot
Agent.
Ending execution of the ROM image.
This option has
been locked
and cannot be
changed.
You attempted to change a configuration setting that has been locked by your sys-
tem administrator. This message can appear either from within Intel® PROSet's
Boot Options tab when operating under Windows* or from the Configuration Setup
Menu when operating in a stand-alone environment. If you think you should be able
to change the configuration setting, consult your system administrator.
PXE-M0E:
Retrying net-
work boot;
press ESC to
cancel.
The Intel Boot Agent did not successfully complete a network boot due to a network
error (such as not receiving a DHCP offer). The Intel Boot Agent will continue to
attempt to boot from the network until successful or until canceled by the user. This
feature is disabled by default. For information on how to enable this feature, contact
Intel Customer Support.
Intel Boot Agent Troubleshooting Procedures
Common Issues
The following list of problems and associated solutions covers a representative set of problems that you might
encounter while using the Intel Boot Agent.
After booting, my computer experiences problems
After the Intel® Boot Agent product has finished its sole task (remote booting), it no longer has any effect on
the client computer operation. Thus, any issues that arise after the boot process is complete are most likely
not related to the Intel Boot Agent product.
If you are having problems with the local (client) or network operating system, contact the operating system
manufacturer for assistance. If you are having problems with some application program, contact the
application manufacturer for assistance. If you are having problems with any of your computer's hardware or
with the BIOS, contact your computer system manufacturer for assistance.

Intel X550-T2 Specifications

General

Brand	Intel
Model	X550-T2
Category	Computer Hardware
Language	English