Intelbras IWR 3000N - Manual Internet Configuration (WAN)

7
Installation wizard home screen
» Skip: this option allows you to bypass the installation wizard. You will be taken to the router’s main conguration page.
In this case, you will have to perform all settings manually.
» Start wizard: by selecting this option, the installation wizard starts the detection of your internet connection and the
step-by-step guide to make the main settings of your router.
» Use as signal repeater: this option closes the installation wizard and displays the Repeater mode conguration page.
This mode is covered in detail in the section Scenarios for Product Use.
The installation wizard is designed to help you dene the essential settings so you can create your own Wi-Fi network
quickly and easily. For most scenarios, the wizard itself provides the information you need to successfully complete the
conguration process. Below are instructions to help you with the main non-trivial scenarios.
Manual internet conguration (WAN)
In some cases, if the wizard does not detect your connection mode, it may be necessary to manually enter the parameters
so that everything works correctly. To do so, if the following screen is displayed when starting the installation wizard,
click the option Conguring manually.
Screen displayed when the wizard does not detect internet connection