Intelbras IWR 3000N - Page 8

8
From there you will have to make the settings according to the following information.
Note: if you have any questions about which connection mode to use, please contact your operator or internet provider
for more information.
» DHCP: if your connection to the Internet is made through an automatic IP address delivery connection, select the DHCP
mode in the checkbox. This mode requires no additional conguration. Just click the button to proceed to the next
settings.
Internet conguration in DHCP mode
» Static IP: if your operator provides your Internet through this connection mode, select the Static IP mode in the checkbox
and ll in the requested information on the screen. You can obtain this information by contacting support from the
operator or internet service provider. After lling in the elds, simply click the button to proceed to the next settings.
Internet conguration in Static IP mode